Showing posts with label path. Show all posts
Showing posts with label path. Show all posts

Thursday, 17 February 2011

Beginning the crane model

One of the models that I am creating is a crane I have been modelling the crane in separate sections and will put them all together to create the final crane.

I used cylinders to make the struts and rotated them into place. I used a cube for the top and bottom of the main arm of the crane and modelled more detail into the bottom section. I modelled half of the crane and then used a symmetry modifier to make the other half.

I added temporary materials so that I could easily change them later without having to assign the materials to all of the sections later when there would be lots of different objects in the way. I deleted the end polygons so that I would be able to weld the section together.

I used clone to copy the section that I had created for the amount of times that wanted and attached the sections into one object. I then used the target weld to join the vertices of the separate sections together.

For the main support section I used the same method of creating a section and then cloning it.

Here is a hook for the crane. I drew out the hook in illustrator and then imported it into 3ds max and used an extrude modifier to create the shape. I adjusted the shape of the hook so that the edges were curved instead of being flat.For the hook section I used two symmetry modifiers to mirror the mesh in two planes so that I only had to model a quarter section. I started with a box and modelled from there.

I modelled the pulleys by starting with a cylinder and using the extrude and inset tool. I created the hole in the middle by extruding both sides inwards and joining the vertices in the middle. I used a symmetry modifier so that both sides would be exactly the same.

I had trouble making the cage to carry the pipes. I used a cube and used the inset and extrude tool to extrude the middle section inwards. I then had to adjust individual vertices, add extra loops and weld vertices to create the correct shape. I used symmetry to mirror the other half so I only had to model one side.
I used tubes for the pipes and added an image as a material. I cloned the object to create the group of pipes.

Wednesday, 16 February 2011

Card table

Here is a card table that is one of the models for the assignment that I have modelled, this will go with the playing cards and poker chips chips that I have already modelled.

I found modelling the card table quite easy, I used illustrator to draw out a path for the shape of the table and used the loft tool to create the edge around the table. I extruded the same path to create the center of the table. The legs of the table were created using by extruding a cylinder into the shape that I wanted to create.

Friday, 4 February 2011

Modelling a glass

Here is a glass that I have modelled. I created a path in illustrator and then used the lathe modifier to create the glass. This worked well and created the shape that I was looking for.